R3 — For shippers

The R3 uploads data automatically over the cellular network. At origin, your main job is correct installation and activation.

Watch: R series overview (video)

Power on

The R3 has one button. Press and hold until the LCD shows a flashing R — this means the device has started successfully and is Recording.

Setup steps

1. Mount the tracker securely per your SOP.
2. Power on as above and confirm the flashing R on the LCD.
3. Note the serial number on the device label — receivers can also use it to look up the trip online.

If the device does not appear online within the expected window, contact support@cydiance.com.

Receiving side

See R3 — For receivers.