B3 — For shippers

Important: DO NOT remove the plastic bag unless you need USB access for final readings.

Start the device

Watch: How to start (video)

1. (Optional) Configure in the Cydiance App — or skip to use factory defaults.
2. Press and hold 5 seconds until both LEDs light up, or start from the app while connected.
3. For the first 30 minutes, the blue LED blinks twice every 2 seconds.
4. After 30 minutes, the LED stops blinking to save battery.
5. To confirm the logger is still active, press the button once. If the LED blinks, the device is running.
6. While logging, a single press creates a MARK (up to 8 marks).
7. Manual stop is not available.

Why is there no stop button?

Place in the shipment

Watch: How to deploy (video)

When possible, use two loggers for the simplest temperature mapping:

1. Place one at the container air outlet to record supply-air temperature from the refrigeration unit.
2. Place one at the container door to capture temperature coverage across the load.

Keep each logger in its plastic bag during transport.

Receiving side

See B3 — For receivers.

Important

• DO NOT place the device near a fire; the battery can be dangerous.
• KEEP AWAY from babies, children, and pets; this device is not a toy.
• Consider our recycling program before disposing of the device.